Pro/Forums - View Single Post - Swiftech Apoggee review by Robotech systemcooling

GlassMan · 12-06-2005, 12:31 PM

Some possible fuel
All side measurements are appxs from photo
Amd 90nm 1meg cache 8.5x13.5mm=114mm*mm
Amd x2 2meg cache 17mmx13.5= 199mm*mm diagonal appx 21.7mm

AMD San Diego, 3700+
Contact patch diameter of TT cam lock (silent boost) on heat spreader 24mm
The heat sink was lapped flat (I hope) on a 3/8" glass plate, down to 2000 grit (w/water) and contact patch appeared to be perfect. Around circle was excess TIM (Thermal right compound) which did not make good contact.
Judging by result of new Storm based wc kit the heat spreader nor it's TIM were damaged by a the HS's hand lapped surface.

12-06-2005, 12:31 PM	#26
GlassMan Cooling Neophyte Join Date: Nov 2004 Location: Kentucky USA Posts: 64	Re: Swiftech Apoggee review by Robotech systemcooling Some possible fuel All side measurements are appxs from photo Amd 90nm 1meg cache 8.5x13.5mm=114mmmm Amd x2 2meg cache 17mmx13.5= 199mmmm diagonal appx 21.7mm AMD San Diego, 3700+ Contact patch diameter of TT cam lock (silent boost) on heat spreader 24mm The heat sink was lapped flat (I hope) on a 3/8" glass plate, down to 2000 grit (w/water) and contact patch appeared to be perfect. Around circle was excess TIM (Thermal right compound) which did not make good contact. Judging by result of new Storm based wc kit the heat spreader nor it's TIM were damaged by a the HS's hand lapped surface. Last edited by GlassMan; 12-06-2005 at 12:50 PM.