Pro/Forums - View Single Post

PsyKoRealm · 01-27-2002, 12:17 AM

I need help on two things for my refrigerated watercooling system.

1. My submerged water pump seems to be having trouble starting. My water temps is between (-21C) & (-(9C). I dont' know why but the pump is on but not pumping any water through. Its about a 60% mixture of anti-freeze and 40% water. The water isn't soild, it is totaly liquid and after 3 minutes it slowly starts to flow. I am afraid it will stop during operation. I think the pump is rated at 90GPH but it might be more. Aside from getting a new pump.. what would be a good solution?

2. Can anyone post a link to a voltage mod done to a KT7A/KT7A-RAID board. thx

01-27-2002, 12:17 AM	#1
PsyKoRealm Cooling Neophyte Join Date: Jan 2002 Location: UC Santa Barbara, CA Posts: 38	Voltage Mod & Pump Help! I need help on two things for my refrigerated watercooling system. 1. My submerged water pump seems to be having trouble starting. My water temps is between (-21C) & (-(9C). I dont' know why but the pump is on but not pumping any water through. Its about a 60% mixture of anti-freeze and 40% water. The water isn't soild, it is totaly liquid and after 3 minutes it slowly starts to flow. I am afraid it will stop during operation. I think the pump is rated at 90GPH but it might be more. Aside from getting a new pump.. what would be a good solution? 2. Can anyone post a link to a voltage mod done to a KT7A/KT7A-RAID board. thx __________________ Athlon T-Bird XP 1700+ (1.43@2.0) PURE HSF BABY!!!!!!! EPOX NForce2 EP-8RDA 256MB DDR400 300w PSU 20GIG Western Digital 40GIG Quantum Fireball MSI Gefore 4 Ti4200 @ 280 / 610 48X Lite-On @ 52X Fireware Flash 16X DVD SBLive! Value 10/100 LAN Zalman HSF Last edited by PsyKoRealm; 01-27-2002 at 12:23 AM.