[Lonely Raven]

I have the case your talking about, but I'm not exactly sure
what your issue is. But let me clarify how mine looks.

I have the YY case and your typical Enermax power supply.
The two bumps (I think your talking about), are on the floor
of the case under the PS. They are there to hold it up like little
feet. I think the idea is to have a little air gap under the PS in
case you have vents under there.

Me personally, I'd rather have rubber feet so as not to transfer
vibration of the fans in the PS to the case.

Also, if for some odd reason those bumps do interfere with your
PS mounting, then I would recomment buying a 3/4" hole saw
(about $10 or less at your local hardware store, make sure
to get a BI-Metal one...not one for cutting wood only), and just
hold saw the buggers out. If your PS is really that large that
they are in the way...then nobody will see your cleanly cut holes
unless you turn your computer on it's head often.

My only concern with the YY case and power supplies, is the
length (or lack of) on the ATX power connection. I know on the
extra long Enermax stuff it's more then perfect. But some others
might be a little short. If you need it, I can measure the distance
from my PS to a couple of system board ATX headers and give
an "Average Length Needed".

Also, a nice mod is to cut an opening for a second PS right above
where the PS normally goes and run dual PS in that case (nice
if you need one for MANY drives or TEC and one for a power
hungry system board). OR, this can also be used to move your
PS up about 5" for better cable running Etc. You only lose a couple
of HD bays...which there are plenty of in that case.