Pro/Forums - View Single Post - Swiftech Apoggee review by Robotech systemcooling

Joe Camel · 12-20-2005, 05:45 PM

that was the area inside the rim but not where the TIM was.

yellow = (about) where i passed the micrometer to get my average:

under the assumption that there isnt a "divot" directly over the die, id say its safe to assume that 2.4mm of IHS is between the die and a HSF (give or take a few TIM joints

)

i cleaned the basement a few weeks ago and cant find that darn IHS ANYWHERE!!!
(ill keep looking though, i KNOW its down here)

EDIT:

soooo thats where i put it....

TIM removed, "dead center":
(lapped 3500 IHS as seen above)
.094" (2.8376mm) EIDT: 2.3876mm
(?.??" x 25.4 = ?.??mm or ?.??mm / 25.4 = ?.??")

black "glue" removed (mostly), on the rim:
(lapped 3500 IHS as seen above)
.119" (3.0226mm)

12-20-2005, 05:45 PM	#123
Joe Camel Cooling Neophyte Join Date: Mar 2004 Location: ohio Posts: 51	Re: Swiftech Apoggee review by Robotech systemcooling that was the area inside the rim but not where the TIM was. yellow = (about) where i passed the micrometer to get my average: under the assumption that there isnt a "divot" directly over the die, id say its safe to assume that 2.4mm of IHS is between the die and a HSF (give or take a few TIM joints ) i cleaned the basement a few weeks ago and cant find that darn IHS ANYWHERE!!! (ill keep looking though, i KNOW its down here) EDIT: soooo thats where i put it.... TIM removed, "dead center": (lapped 3500 IHS as seen above) .094" (2.8376mm) EIDT: 2.3876mm (?.??" x 25.4 = ?.??mm or ?.??mm / 25.4 = ?.??") black "glue" removed (mostly), on the rim: (lapped 3500 IHS as seen above) .119" (3.0226mm) __________________ JoeCamel is F@H for ....A CURE!! (40+ GHz) A64 Phase cooled: FX-55 @ 3204MHz (267x12) - MSI Neo2 - MachII - OCZ DDR Booster & VX @ 3.6V , 267 @ 2,2,2,5 1:1 - x800 XT-PE @ 665/608 - DD Maze4 with 172w TEC 14V TEC PSU - 500W X-Connect PSU A64 Water cooled: 3500 Venice @ 3000MHz (300x10) - DFI LP Ultra-D - Storm G5, D4 pump @ 16V, BIXII, 4x100+ CFM fans - OCZ VX @ 3.6V , 300 5:6 = 250 @ 2,2,2,6 - x850 XT @ 600/630 - socket A HSF & 80mm Tornado , copper mem sinks - OCZ 600W PSU Last edited by Joe Camel; 12-20-2005 at 09:38 PM. Reason: .83 , .38 whats the diff?