Pro/Forums - View Single Post

BillA · 12-22-2005, 10:59 AM

"doesnt coat the components with white film."
??
so I would presume no film with just 5% Zerex AF ? no, could be the Hy-Per Lube too
Scott, any idea which way be inhibiting the film deposition ?

using 'fresh' distilled water, I get the white film on the ID and OD of vinyl tubing (dumping into the 2 gal res); at the same time not noticeable on the ID of silicone or copper tubing - but I'm sure the same film is there too

EDIT
I'm installing a 15W UV sterilizer, will it affect the white film formation ?
should start a pool

12-22-2005, 10:59 AM	#4
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	Re: Water Additives..need some suggestions. "doesnt coat the components with white film." ?? so I would presume no film with just 5% Zerex AF ? no, could be the Hy-Per Lube too Scott, any idea which way be inhibiting the film deposition ? using 'fresh' distilled water, I get the white film on the ID and OD of vinyl tubing (dumping into the 2 gal res); at the same time not noticeable on the ID of silicone or copper tubing - but I'm sure the same film is there too EDIT I'm installing a 15W UV sterilizer, will it affect the white film formation ? should start a pool