Jaydee, thanks for your reply.
I think I did it right. The T-Bal has an input for inpulses per liter where I typed in 6,100. It also provides what would appear to be a true pulse reading without any multiplier / division effect.
Might be my problem with the lack of a filter. I dismissed it as not really needed.
Where do I find one of these filters?
Louis
Quote:
|
Originally Posted by jaydee
Did you set the T-Bal correctly? The divider is set to a fan's pulse rate output not the swissflows. Not sure how the T-Bal is setup but for the CF633 you just change the PPR setting to 1 instead of the standard 2 for a fan. Then whatever reading it puts out divide by 6100. I checked mine with a separate flow meter to verify.
Still though setting the divder to 1 would only give you 4000... Maybe the T-Bal is setup a different way.
Also did you put a filter in front of that Swissflow? Any little particle will ruin it. Swissflow recommends a 20micron filter.
|