Pro/Forums - View Single Post

bigben2k · 01-01-2006, 01:05 PM

Sounds good.

I'm still pondering wether or not I should calibrate it myself, but I do plan, at least, to check temperature readings on a regular basis (and log all the results).

Since I've opted to build the 24 bit ADC, there is going to be a calibration procedure involved. I'm thinking more and more about having a starting point, i.e. one of those Fluke units, which I'd send out for calibration.

Not sure what you mean by "The Meter Shop on Director's Row" ?

With the wind tunnel, I've got more temp probes to keep up with than I care to count!

01-01-2006, 01:05 PM	#5
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: sensor calibration Sounds good. I'm still pondering wether or not I should calibrate it myself, but I do plan, at least, to check temperature readings on a regular basis (and log all the results). Since I've opted to build the 24 bit ADC, there is going to be a calibration procedure involved. I'm thinking more and more about having a starting point, i.e. one of those Fluke units, which I'd send out for calibration. Not sure what you mean by "The Meter Shop on Director's Row" ? With the wind tunnel, I've got more temp probes to keep up with than I care to count! __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101