Pro/Forums - View Single Post

kcrossley · 01-05-2006, 01:01 AM

After reading this discussion board it appears that the Snap Server 2000 has one fan from Sunon. I believe it's model #KD1205PHB3 and is rated at 10.2 CFM. http://rocky.digikey.com/WebLib/Suno...05PHB3%20H.jpg Is this correct?

Also, which is better, a sleeve bearing fan or a ball bearing fan? And finally, has anyone replaced their stock fan with a higher CFM fan? If so, would you please post a link?

Thanks,
Kelly

01-05-2006, 01:01 AM	#1
kcrossley Cooling Neophyte Join Date: May 2003 Location: Annapolis, MD Posts: 60	Snap Server 2000 Fans? After reading this discussion board it appears that the Snap Server 2000 has one fan from Sunon. I believe it's model #KD1205PHB3 and is rated at 10.2 CFM. http://rocky.digikey.com/WebLib/Suno...05PHB3%20H.jpg Is this correct? Also, which is better, a sleeve bearing fan or a ball bearing fan? And finally, has anyone replaced their stock fan with a higher CFM fan? If so, would you please post a link? Thanks, Kelly Last edited by kcrossley; 01-05-2006 at 01:10 AM.