Quote:
|
Originally Posted by blue68f100
The 2000 uses a 72pin DIMM (edo) 32 meg. and it is upgradeable.
The 2000 use a 52x52x15mm size, which is a odd size. Sunon KD1205PHB3, 8.5 cfm, 22.5dba, 0.7w. The fan is only held in place with a 2 screws, so a 50x50 can be made to fit. I like them to run quite.
The 2000 only has a 50w power supply. I had 2 7200 in mine and it worked fine. Till the fan failed and I fried the drives and other parts. I had changed my ISP and failed to change the smtp in the server with the new email settings. If you are going to have heavy use, yes use a high cfm fan, but stay under 30dba, that is when they start being heard.
|
The Sunon KD1205PHB3 fan is still available and is rated at 10.2 CFM. Do you think they changed the specs on what was originally installed in the Snap Server 2000? I have a hardware version 2 model. Is there another higher CFM fan you can recommend? Also, what's the mximum amount of RAM I can install and does it provide any performance improvements?
Thanks,
Kelly