Pro/Forums - View Single Post - Need recommendations for internal setup or external setup

ricecrispi · 01-07-2006, 12:04 AM

I suggest not placing the rad on the bottom of the Cm stacker. It gets complicated with a res above the pump and the rad next to the pump. Spacing makes for very tight bends and a funny looking loop. T-Line is better idea for the stacker case.

You should mod the CM stacker case for PA 120.3 uptop. Not very straight forward mod but should be worth it. Saves space and you should get great temps

01-07-2006, 12:04 AM	#4
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	Re: Need recommendations for internal setup or external setup I suggest not placing the rad on the bottom of the Cm stacker. It gets complicated with a res above the pump and the rad next to the pump. Spacing makes for very tight bends and a funny looking loop. T-Line is better idea for the stacker case. You should mod the CM stacker case for PA 120.3 uptop. Not very straight forward mod but should be worth it. Saves space and you should get great temps