Pro/Forums - View Single Post - Finally got my loop together...need bleeding advice :)

TMonte · 01-17-2006, 09:10 AM

Hi,

Thanks for the response. The tubing runs under the drive and connects to the bottom port of the radiator - it's a single pass (BIP X-flow).

The pump is a Laing D5.

I'll try the "aerobics" next. I corked up the fillport and let it run overnight with the fan cranking, and it seems much better than just 8 hours ago. There are still some bubbles in the lines, but mostly in the fill/T line. Hopefully the shaking will dislodge anything trapped in the radiator or blocks, though I figure the turbulence in the blocks kinda helps take care of that anyway.

Thanks!
Tom

01-17-2006, 09:10 AM	#3
TMonte Cooling Neophyte Join Date: Dec 2005 Location: New Jersey, USA Posts: 14	Re: Finally got my loop together...need bleeding advice :) Hi, Thanks for the response. The tubing runs under the drive and connects to the bottom port of the radiator - it's a single pass (BIP X-flow). The pump is a Laing D5. I'll try the "aerobics" next. I corked up the fillport and let it run overnight with the fan cranking, and it seems much better than just 8 hours ago. There are still some bubbles in the lines, but mostly in the fill/T line. Hopefully the shaking will dislodge anything trapped in the radiator or blocks, though I figure the turbulence in the blocks kinda helps take care of that anyway. Thanks! Tom