Pro/Forums - View Single Post

Etacovda · 01-19-2006, 05:41 PM

The G5 and the 50z are natively 1/2, but you can swap the barbs out on the g5, and use adapters on the 50z.

The Pa160 can be fitted with whatever barb you choose, as long as the thread is correct.

So yeah, it can be done - but you'll need adapters for the 50z, and different barbs for the G5 and the PA

01-19-2006, 05:41 PM	#2
Etacovda Cooling Savant Join Date: Feb 2004 Location: Dunedin NZ Posts: 735	Re: Will this fit? The G5 and the 50z are natively 1/2, but you can swap the barbs out on the g5, and use adapters on the 50z. The Pa160 can be fitted with whatever barb you choose, as long as the thread is correct. So yeah, it can be done - but you'll need adapters for the 50z, and different barbs for the G5 and the PA __________________ Hypocritical Signature I tried to delete: Procooling: where scientific principles are ignored because big corporations are immune to mistakes and oversights.