Pro/Forums - View Single Post

zoson · 01-21-2006, 05:26 AM

http://www.columbia.edu/~ahm89/Pictures/guts-s.jpg
You can cram an awful lot into a PC60.
Since the picture I ripped out the HD rails and fixed that nasty 180' bend going to the pump. I am also now using a Hydor L30 instead of the ViaAqua 1300. Both are excellent pumps, but I owned two VA's, and both started having the clicking noise problem.
I use Tygon 1/2" ID 5/8" OD tubing. You can see that I've got some pretty extreme bends in there, but I have never had a kinking problem.
Edit: to my knowledge, it's the general consensus here on procooling that 1/2" id tubing provides better performance.

01-21-2006, 05:26 AM	#8
zoson Cooling Savant Join Date: Nov 2001 Location: X Posts: 204	Re: Will this fit? http://www.columbia.edu/~ahm89/Pictures/guts-s.jpg You can cram an awful lot into a PC60. Since the picture I ripped out the HD rails and fixed that nasty 180' bend going to the pump. I am also now using a Hydor L30 instead of the ViaAqua 1300. Both are excellent pumps, but I owned two VA's, and both started having the clicking noise problem. I use Tygon 1/2" ID 5/8" OD tubing. You can see that I've got some pretty extreme bends in there, but I have never had a kinking problem. Edit: to my knowledge, it's the general consensus here on procooling that 1/2" id tubing provides better performance. __________________ Core i7 930 @ 4254Hz 22x193 \| ASUS R3E 901 BIOS \| 12GB Mushkin Blackline 3x4GB @ 1547MHz 7-8-7-24-1N \| Lian Li PC-A10B 2x EVGA GTX275 SLI @ 720/1266/1566 \| 2x 80GB Intel X25-M G2 SSD Raid 0 \| 3x 1TB Samsung Spinpoint 7.2K Raid 5 \| Corsair 950TX H2O \| Enzotech Sapphire Rev.A \| EK-FB RE3 \| Swiftech - 2x MCW60/GTX275 Unisink, MCP655b, MCRes Micro.v2 \| 3x HWLabs SR1-120 あなたの神への弓 Time isn't wasted, when you're gettin' wasted. Last edited by zoson; 01-21-2006 at 05:32 AM.