Pro/Forums - View Single Post

Long Haired Git · 01-30-2006, 05:47 PM

There are no PQ graphs for either radiator, and the block isn't reviewed by RoboTech for the PQ graph, so I just can't help you.

Seeing as you own most of the gear, plug it all together and see what sort of flow rate you get (timed filling of a bucket of known volume) and if its:
1) Less than 2 LPM I'd buy a MCP655
2) Between 2 and 3.5 LPM I's only buy a MCP655 if I was hunting the last degree or fraction there-of
3) More than 3.5 LPM I would be happy.

01-30-2006, 05:47 PM	#4
Long Haired Git Cooling Savant Join Date: Jan 2003 Location: Sydney, Oz Posts: 336	Re: Thermoelectric/Watercooled Rig There are no PQ graphs for either radiator, and the block isn't reviewed by RoboTech for the PQ graph, so I just can't help you. Seeing as you own most of the gear, plug it all together and see what sort of flow rate you get (timed filling of a bucket of known volume) and if its: 1) Less than 2 LPM I'd buy a MCP655 2) Between 2 and 3.5 LPM I's only buy a MCP655 if I was hunting the last degree or fraction there-of 3) More than 3.5 LPM I would be happy. __________________ Long Haired Git "Securing an environment of Windows platforms from abuse - external or internal - is akin to trying to install sprinklers in a fireworks factory where smoking on the job is permitted." (Prof. Gene Spafford) My Rig, in all its glory, can be seen best here AMD XP1600 @ 1530 Mhz \| Soyo Dragon + \| 256 Mb PC2700 DDRAM \| 2 x 40 Gb 7200rpm in Raid-0 \| Maze 2, eheim 1250, dual heater cores! \| Full specifications (PCDB)