I like that Zclk changing thing to give you more i/o bandwidth, and that you can use it at ratios of 100:133, 100:166 and 133:160. I'd like to know though if you can run at a 100:133 ratio, and run at say 147mhz fsb, so you have a memory speed of 195mhz
as far as reaching above 110mhz fsb goes, I'm sure with playing with the settings enough you'll get above that, it is just a matter of time until someone figures out what to do. The board is designed with 133mhz fsb cpu's in mind
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|