Pro/Forums - View Single Post

ElMoIsEviL · 02-06-2006, 02:12 PM

Barb or Elbow Barb.

Wondering where I could get this from Canada/USA for an Alphacool NexXxoS NVXP-3 block. Need to connect the block to a 1/2"ID system.
Should look like this...

Very important.

Block Info:
Alphacool NVXP-3
Technical data:

Overall dimensions (without connections):
Length 91 mm, Width 136 mm, Height 24 mm
Weight: 482 gr.
Connections: G1/4"

Thanks guys..

BTW it's the same type of fitting that would fit this..

http://www.frozencpu.com/ex-res-82.html?id=ThcnZnJa

02-06-2006, 02:12 PM	#1
ElMoIsEviL Cooling Neophyte Join Date: Jan 2006 Location: Ottawa, Ontario Posts: 71	Need G1/4" Thread to 1/2" ID tubing Barb or Elbow Barb. Wondering where I could get this from Canada/USA for an Alphacool NexXxoS NVXP-3 block. Need to connect the block to a 1/2"ID system. Should look like this... Very important. Block Info: Alphacool NVXP-3 Technical data: Overall dimensions (without connections): Length 91 mm, Width 136 mm, Height 24 mm Weight: 482 gr. Connections: G1/4" Thanks guys.. BTW it's the same type of fitting that would fit this.. http://www.frozencpu.com/ex-res-82.html?id=ThcnZnJa __________________ Asus P5N32-E SLI \| Intel Core 2 Extreme QX6700 @ 4.23GHz (Swiftech MCW5002-775T 226W Pelt) \| 4x1GB OCZ Special Ops DC PC2-6400 DDR2 XTC \| 2xBFG TECH GeForce 8800 GTX OC 768MB Water Cooled \| Sound Blaster X-Fi FaT@l1Ty FPS Sound Card \| 2x74GB WD Raptor 10,000 RPM RAID0 \| 2x320GB Seagate 7200.10 7,200 RPM RAID0 \| SuperCooled: Enterprise Custom Cooling Last edited by ElMoIsEviL; 02-06-2006 at 02:23 PM.