Pro/Forums - View Single Post

Loquillo · 02-10-2006, 11:18 AM

This thread is just to show you our first experiment with dry ice.

First results

We used a SanDiego 3700+. Unfortunately, we didn’t achieve the overclock level that we expected. This was our best result

http://valid.x86-secret.com/show_oc?id=67602

since the processor turned out to be very unstable with a higher fsb.

Anyway, we feel quite happy with what we got ( –49° in a hot summer day, with a room temperature of 36.5° C). This is a good incentive for us to get a better processor and see how far we can go.
After more than 7 hours, there was no condensation anywhere, so we’re pretty satisfied about this too.

If you want to see how this pot was built, go here

http://www.tortugahard.com/foro/view...er=asc&start=0

We’d like to know your comments and opinions, as we don’t have much experience on this matter.

02-10-2006, 11:18 AM	#1
Loquillo Cooling Neophyte Join Date: Feb 2004 Location: www.tortugahard.com Posts: 11	Dry Ice, first steps This thread is just to show you our first experiment with dry ice. First results We used a SanDiego 3700+. Unfortunately, we didn’t achieve the overclock level that we expected. This was our best result http://valid.x86-secret.com/show_oc?id=67602 since the processor turned out to be very unstable with a higher fsb. Anyway, we feel quite happy with what we got ( –49° in a hot summer day, with a room temperature of 36.5° C). This is a good incentive for us to get a better processor and see how far we can go. After more than 7 hours, there was no condensation anywhere, so we’re pretty satisfied about this too. If you want to see how this pot was built, go here http://www.tortugahard.com/foro/view...er=asc&start=0 We’d like to know your comments and opinions, as we don’t have much experience on this matter. __________________ www.tortugahard.com Last edited by Loquillo; 06-28-2007 at 12:50 PM.