Pro/Forums - View Single Post - Quantum M4100

blue68f100 · 02-12-2006, 09:38 PM

After you do a factory reset you must use assist to do a initial setup. The reset cmd sets the IP address to 0.0.0.0. The reason you don't see it.
The reset does not clear the disk configuration. If the unit had a 4 disk raid 5, the data is not lost. If the unit was not renamed the name will be "SNAP(serial no)".

If you need a copy of assist let me know.

02-12-2006, 09:38 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Quantum M4100 - will it live? After you do a factory reset you must use assist to do a initial setup. The reset cmd sets the IP address to 0.0.0.0. The reason you don't see it. The reset does not clear the disk configuration. If the unit had a 4 disk raid 5, the data is not lost. If the unit was not renamed the name will be "SNAP(serial no)". If you need a copy of assist let me know. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820