Pro/Forums - View Single Post

blue68f100 · 03-19-2006, 08:53 AM

jontz, the 2200 has 2 promise controllers. Each drive is independent. I think the same board can be used is the 4200. The cables are only 2 - 3" long. If it was a cable problem I would suspect it would report a drive problem. He has 2 different mfg and drive sizes, the reason he is in JBOD config, Instead of a RAID 0 or 1. I was wondering if he was having a cooling problem.

03-19-2006, 08:53 AM	#1116
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Hack a Snap Sever 1000? jontz, the 2200 has 2 promise controllers. Each drive is independent. I think the same board can be used is the 4200. The cables are only 2 - 3" long. If it was a cable problem I would suspect it would report a drive problem. He has 2 different mfg and drive sizes, the reason he is in JBOD config, Instead of a RAID 0 or 1. I was wondering if he was having a cooling problem. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820