Re: Hack a Snap Sever 1000?
Quote:
|
Originally Posted by blue68f100
jontz, the 2200 has 2 promise controllers. Each drive is independent. I think the same board can be used is the 4200. The cables are only 2 - 3" long. If it was a cable problem I would suspect it would report a drive problem. He has 2 different mfg and drive sizes, the reason he is in JBOD config, Instead of a RAID 0 or 1. I was wondering if he was having a cooling problem.
|
Fan is fine
It is fine with either drive independantly
So im now trying the 250 plugged in on IDE and power, and the maxtor just on power....
I could try putting that other fan on, just its not very good on the outside!
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server
Snap Server 2200 v3.4.807
2x 250GB Seagate Barracuda 7200.9
w/ UNIDFC601512M Replacement Fan
"Did you really think it would be that easy??"
Other NAS's
1x NSLU2 w/ 512mb Corsair Flash Voyager
Running Unslung 6.8b
1x NSLU2 w/ 8Gb LaCie Carte Orange
Running Debian/NSLU2 Stable 4.0r0
250GB LaCie Ethernet Disk
Running Windows XP Embedded
|