Pro/Forums - View Single Post

ricecrispi · 03-20-2006, 01:59 AM

That is High as the max i seen opty go into is low 50s.
My 144 does 45ish range at load on air and low 30's at idle at 2.65 ghz/295x9.

My other 939s I have run idle 25-28C and 38C-40C Load.

I would remount and look to see if the TIM is spread properly.

5v for the FAN is low for OCing. Plug the fan into CPU header on DFI mobo and you can vary how fast the fan runs based on temp. It is in smartguardian speed fan program. So the fan can start up at low 30s and run full speed at temps from 40-50 C range.

TDP is probably for only at stock settings.

03-20-2006, 01:59 AM	#5
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	Re: San Diego 3GHz 1,5V temps too high? That is High as the max i seen opty go into is low 50s. My 144 does 45ish range at load on air and low 30's at idle at 2.65 ghz/295x9. My other 939s I have run idle 25-28C and 38C-40C Load. I would remount and look to see if the TIM is spread properly. 5v for the FAN is low for OCing. Plug the fan into CPU header on DFI mobo and you can vary how fast the fan runs based on temp. It is in smartguardian speed fan program. So the fan can start up at low 30s and run full speed at temps from 40-50 C range. TDP is probably for only at stock settings.