Pro/Forums - View Single Post

Long Haired Git · 03-23-2006, 05:29 AM

Whomever gets one, do the Cooling-Masters.com test and see how long it takes to heat up a known volume of water a known number of degrees whilst insulating the loop (so just a run of tubing from inlet to outlet plus reservoir to make it 1L or similar) so we can see how much heat gets into the coolant.
If its the same as the Laing-DDC (around 60%) then it will kick a$$.

03-23-2006, 05:29 AM	#7
Long Haired Git Cooling Savant Join Date: Jan 2003 Location: Sydney, Oz Posts: 336	Re: DDC Plus Whomever gets one, do the Cooling-Masters.com test and see how long it takes to heat up a known volume of water a known number of degrees whilst insulating the loop (so just a run of tubing from inlet to outlet plus reservoir to make it 1L or similar) so we can see how much heat gets into the coolant. If its the same as the Laing-DDC (around 60%) then it will kick a$$. __________________ Long Haired Git "Securing an environment of Windows platforms from abuse - external or internal - is akin to trying to install sprinklers in a fireworks factory where smoking on the job is permitted." (Prof. Gene Spafford) My Rig, in all its glory, can be seen best here AMD XP1600 @ 1530 Mhz \| Soyo Dragon + \| 256 Mb PC2700 DDRAM \| 2 x 40 Gb 7200rpm in Raid-0 \| Maze 2, eheim 1250, dual heater cores! \| Full specifications (PCDB)