mx, you gonna rock some tests .. ?
was thinkin it'd be nice to see plexi top vs. inlet flooded top/tank combo .. think it's possible to put a G1.0 threaded barb onto the top of the tank .. can't find anywhere that makes them for G1.0 .. ?
Quote:
|
Originally Posted by mx
I'd also like to include this dual DDC top I found at watercool.de in the test.
|
would that be two in series .. or one humping the other (LOL - that might be *hot*) .. ?
given,
1.) pump -> CPU -> pump -> GPU -> rad -> res
2.) pump -> pump -> CPU -> GPU -> rad -> res
3.) pump/hump -> CPU -> GPU -> rad -> res
I'm thinking,
heat - all three net the same pump heat
flow - 1 and 2 get better flow especially if the inlets are heavily flooded with some pump inlet res like the alpha cool tank
head - 1 would leverage pump head the best sine it has dedicated pumps for the two blocks
mx, how you structure you circuit with the dual DDC ultras ?
so ..
1.) 6mm inner bore (assuming same as the single)
2.) no top inlet for intake pump
3.) no top intake for outlet pump
4.) not able to heavily flood the outlet pump
1 and 2 could be varied .. 3 and 4 could be varied making top bigger with some sort of an inner chamber to allow more flood .. still not sure how variations would fare against the other two dual pumps scenarious above, assuming inner bore, top inlet, and heavy flooding for all ..
Quote:
|
Originally Posted by mx
And the dual top their developing over at forumdeluxx.de. I don't understand much but I think it's the same idéa only a high performance version.
|
yea, definitely something lost in the translations! but I thought this pic said it best ..
similar except the second pump already has top inlet .. and the top-top design might more easily lend itself to some sort of inner chamber for flooding ..