View Single Post
Unread 04-06-2006, 08:22 PM   #125
Think
Cooling Neophyte
 
Join Date: Jan 2003
Location: Canada
Posts: 11
Default Re: Sick Algae Buildup

Quote:
Originally Posted by airspirit
As you can see, the tubing is now crystal clear. The solution to this quite simply was to run a high concentration of cleansers through it.

After much deliberation, I went with the following mixture after draining my system:

50% tap water
40% Pine-Sol
10% Lysol

The reason that I did it this way was twofold. While Lysol mixes readily with water, the Pine-Sol doesn't. Further, I figured that since they both are antibacterial and they both cut grime in different ways, it would be better to run them together to complement each other.

What I discovered was that after about two minutes the coolant went cloudy white. When watching the biotic colonies you could see them MELTING. It was awesome. After two hours, 95% of the gunk was washed off the walls and held in suspension in the coolant. At that point, I worked the hose by kinking it near each remaining patch so the water would scour it off. In the end there is barely any trace of infestation left in my system, and due to the dual cleansers I can be assured that it is dead.

Not being the type to trust, though, I have drained and refilled my system with water, aquarium algae killer, and sanitizer. If this doesn't do the trick, nothing will. So far the water has remained clear.

For all of you that didn't believe that your cooling system could be scoured without mechanical means: YOU WERE WRONG. All it takes is a strong enough witches brew and you can dissolve anything. I encourage you to give this a whirl and see how it works for YOU if you have this problem. I'll prolly check and see if I can write a sticky on this, because this is something that can help quite a few of us.

Tomorrow, I'm going to redrain and fill with distilled/hyperlube/glycol/sanitizer. That should keep me clear and beastie free from here on out.
Nice work. I guess the opaque look of the tubing can't be helped. Just curios though, ever thought of using Zerex Valvoling super coolant, with some anti aglae agent from your local pet store with distilled water?. Not sure on the ratio but mabye 10% Zerex, few drops of anti algae every month or so and the remaining distilled water?
Think is offline   Reply With Quote