Pro/Forums - View Single Post

blue68f100 · 04-11-2006, 09:41 AM

This sequence is missing the OS.

If it's a v2 which it proably is, if you can't connect at all. If a v1 you can connect with out any drives? Have you tried connecting with out any drives?

V1 & V2 image files are different. If you copied a 2200 image over you will need to drop back to a 1000. It should then work.

If the Sys & Disk blink at the same time, then 2 disk blinks. Its a MAJOR Problem.

04-11-2006, 09:41 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 1000 Blinking LED Problem This sequence is missing the OS. If it's a v2 which it proably is, if you can't connect at all. If a v1 you can connect with out any drives? Have you tried connecting with out any drives? V1 & V2 image files are different. If you copied a 2200 image over you will need to drop back to a 1000. It should then work. If the Sys & Disk blink at the same time, then 2 disk blinks. Its a MAJOR Problem. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820