Pro/Forums - View Single Post

buckdakat · 04-19-2006, 09:39 AM

Hi blue,
I thought you might answer this one - thanks. Unfortunately the 'ide LBA48bit reset' command was not found. The only ide command option was 'ide 48bitLBACounter [get|reset]'. (I tried the reset option but the disk still formatted to 128GB - no surprise.) Next steps? Could it be that the 300GB disk has to be in position 1 for large disk support to be enabled? Thanks, bdk

BTW - As I think you mentioned in a post on another thread the OS is installed on both disks with the 2200 so I had actually already disconnected the 80GB disk and booted with only the 300GB (in position 2) with no problem. BDK

04-19-2006, 09:39 AM	#3
buckdakat Cooling Neophyte Join Date: Apr 2006 Location: Tulsa, OK Posts: 6	Re: Snap Server 2200 Disk Format Issue Hi blue, I thought you might answer this one - thanks. Unfortunately the 'ide LBA48bit reset' command was not found. The only ide command option was 'ide 48bitLBACounter [get\|reset]'. (I tried the reset option but the disk still formatted to 128GB - no surprise.) Next steps? Could it be that the 300GB disk has to be in position 1 for large disk support to be enabled? Thanks, bdk BTW - As I think you mentioned in a post on another thread the OS is installed on both disks with the 2200 so I had actually already disconnected the 80GB disk and booted with only the 300GB (in position 2) with no problem. BDK Last edited by buckdakat; 04-19-2006 at 10:02 AM.