Pro/Forums - View Single Post

webboy · 04-24-2006, 08:56 AM

System reset should be admin:admin if thats not working then maybe the reset wasnt performed properly?

Taken from the administration guide:

To Invoke Mode 1 Using the Reset Button on Snap Servers 4200, 4500, 15000, or 18000

On Snap Servers 4200, 4500, and 15000 remove the front bezel and press the white button, located to the left of the black power button. On the Snap Server 18000 the reset button is accessed via a small hole next to the power button on the front of the server. Use a small device like a paperclip to push the reset button. The system will reboot after about a minute. As a part of the reset and reboot process, the Snap Server clears user-defined settings such as DHCP configuration, the server name defaults to its factory setting, network speed and bonding settings are returned to their defaults, and the Administrator password is reset to the default (admin). The Snap Server then does a full boot.

Did you try user admin with no password?

04-24-2006, 08:56 AM	#2
webboy Cooling Neophyte Join Date: Feb 2005 Location: NJ Posts: 56	Re: Admin password reset on OS 2.6.050 System reset should be admin:admin if thats not working then maybe the reset wasnt performed properly? Taken from the administration guide: To Invoke Mode 1 Using the Reset Button on Snap Servers 4200, 4500, 15000, or 18000 On Snap Servers 4200, 4500, and 15000 remove the front bezel and press the white button, located to the left of the black power button. On the Snap Server 18000 the reset button is accessed via a small hole next to the power button on the front of the server. Use a small device like a paperclip to push the reset button. The system will reboot after about a minute. As a part of the reset and reboot process, the Snap Server clears user-defined settings such as DHCP configuration, the server name defaults to its factory setting, network speed and bonding settings are returned to their defaults, and the Administrator password is reset to the default (admin). The Snap Server then does a full boot. Did you try user admin with no password?