Pro/Forums - View Single Post

blue68f100 · 04-24-2006, 11:17 AM

Haven't dealt with one of those models. But I do know the Snap OS.
When you execute "ide 48BitLBA Counter reset"
Then check the value with "ide 48BitLBA Counter get"
if the value = "0" no 48LBA Support

If you get a value > 0 you may/will need to issue "co de format 10000 /reinit" for drive 1. Where 10000 is the drive ID. You will need to do this for each drive.

04-24-2006, 11:17 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: 12000 large disk support? Haven't dealt with one of those models. But I do know the Snap OS. When you execute "ide 48BitLBA Counter reset" Then check the value with "ide 48BitLBA Counter get" if the value = "0" no 48LBA Support If you get a value > 0 you may/will need to issue "co de format 10000 /reinit" for drive 1. Where 10000 is the drive ID. You will need to do this for each drive. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820