[ben3434]

Thanks for the .805 update. I performed the update and reinit and my version 1.1 hardware with 1.2.180 bios recognizes my 200GB hard drive as a '189GB' drive in the drive status page. However, when I go to format the drive (which worked fine when they were only recognized as 137GB (pre-update)) it only formats to around 40% and then I get a disk error. It only shows up as a warning in the log. The log states:

W File System : Format terminated unsuccessfully Disk 10000
Individual 4/28/2006 8:00:12 PM
W File System : mkfs failed!!! Error = 5 Disk 10000
Individual 4/28/2006 8:00:12 PM
W File System : _mkfs_WriteBlock - Undefined internal error Disk 10000
Individual 4/28/2006 8:00:12 PM
W File System : Cannot Write: Blk 266354816 Disk 10000
Individual 4/28/2006 8:00:12 PM
E Disk Driver : Cannot Write Device 80070000 Block 266354816

Any ideas? Do I have to turn on 48 bit? Do I need more memory than 32MB?

Thanks in advance.