View Single Post
Unread 05-01-2006, 04:32 PM   #16
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Upgrading Snap 4500

Wait ..... Was this is a repeat of a problem reported earlier ??????

Do you have your data backed off where you can play????

I think that happen since the array was built with 250 gig. The array was bassed on it. The size is bassed on the smallest drive.

Did you upgrade to v4.1 like you mentioned earlier????

Set to JBOD (4 x 500) then back to Raid 5.
Check to see if it reconize the drives as 480 gig.

Then I would do a re-format of the drives, making sure no hidden markers from breaking the raid to jbod.

The set the raid 5 array up.

I think this is a repeat of what happen earlier.........

Looks like this is going to be a learning exercise for us. New to Guardian OS.
What works with Snap OS does not seam to apply to the Guardian OS.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote