Pro/Forums - View Single Post

Gabriel Rouchon · 02-02-2002, 08:01 PM

In response to this debate..

Preamble: unfortunately I won't be able to respond individually, but here are some general answers to the questions raised in this debate:

Re. 1/2" vs 3/8" controversy: someone said we are not concerned about liquid cooling, reason why we do not offer 1/2" blocks. This couldn't be farther from the truth. The decision to stick to 3/8" OD is a strategic one on my part. I want to promote liquid cooling not only among extreme overclockers, but into the industry at large. I feel that 1/2" tubing is too cumbersome. But being a hardcore overclocker myself, I also know that 1/4" OD is really too restrictive. Therefore, 3/8" represents a good compromise in my opinion.

Re. tube inserts: Tube inserts for use with vinyl tubing are provided with the block. The wall of the insert is extremely thin : 0.015".

All this being said, flow is really not as important as some would like to say; the design of the block is much more critical. I guess review sites will report their findings soon enough !

Air gathering in the block (in response to Joe): lengthy research, and testing is behind this block with respect to bleeding. See detailed bleeding instructions page 2 here: http://www.swiftnets.com/installation guide AMD.pdf

In standard single CPU config, bleeding is absolutely flawless. It get a little tricky with dualies, but really not a problem if you follow the instructions...

Finally, in reference to quick-connect fittings: as a user and overclocker, I simply love them for their convenience. No tools, no clamps, absolutely safe (when properly used, like anything else). They are used for most professional installations where there is a need for frequent assembly/disassembly. I feel that convenience is key to promote the liquid cooling solution in the public at large.

While liquid-cooling is becoming a more widespread solution, my priorities are unchanged: performance and quality first, with economics taking the back-seat. Yet, the reality is that economics cannot be totally ignored, and my design reflects what I felt was necessary to produce the best product overall.

Best to all of you!

Gabriel Rouchon
President, CEO

Swiftech Inc.,

02-02-2002, 08:01 PM	#16
Gabriel Rouchon Cooling Neophyte Join Date: Feb 2002 Posts: 8	In response to this debate.. Preamble: unfortunately I won't be able to respond individually, but here are some general answers to the questions raised in this debate: Re. 1/2" vs 3/8" controversy: someone said we are not concerned about liquid cooling, reason why we do not offer 1/2" blocks. This couldn't be farther from the truth. The decision to stick to 3/8" OD is a strategic one on my part. I want to promote liquid cooling not only among extreme overclockers, but into the industry at large. I feel that 1/2" tubing is too cumbersome. But being a hardcore overclocker myself, I also know that 1/4" OD is really too restrictive. Therefore, 3/8" represents a good compromise in my opinion. Re. tube inserts: Tube inserts for use with vinyl tubing are provided with the block. The wall of the insert is extremely thin : 0.015". All this being said, flow is really not as important as some would like to say; the design of the block is much more critical. I guess review sites will report their findings soon enough ! Air gathering in the block (in response to Joe): lengthy research, and testing is behind this block with respect to bleeding. See detailed bleeding instructions page 2 here: http://www.swiftnets.com/installation guide AMD.pdf In standard single CPU config, bleeding is absolutely flawless. It get a little tricky with dualies, but really not a problem if you follow the instructions... Finally, in reference to quick-connect fittings: as a user and overclocker, I simply love them for their convenience. No tools, no clamps, absolutely safe (when properly used, like anything else). They are used for most professional installations where there is a need for frequent assembly/disassembly. I feel that convenience is key to promote the liquid cooling solution in the public at large. While liquid-cooling is becoming a more widespread solution, my priorities are unchanged: performance and quality first, with economics taking the back-seat. Yet, the reality is that economics cannot be totally ignored, and my design reflects what I felt was necessary to produce the best product overall. Best to all of you! Gabriel Rouchon President, CEO Swiftech Inc.,