Pro/Forums - View Single Post

RalphW · 05-25-2006, 07:43 PM

The plan is for next week.

I'll put in a more tapered chamfer on those holes you're referring to.
I've put quite a few 4mm threads in 6mm and thicker copper. Maybe I'll practice on some 3mm first.

My current graphic card has two mounting holes at 45 deg. to the core.
I will drill and tap into the top after it's made.
I can make up a stainless steel backing plate for this card and another one when (if) I upgrade the graphic card. The top section hopefully has enough overhang to mount cards with the four hole square pattern.
I'm still looking for dimensions for GF7x00 cards.

05-25-2006, 07:43 PM	#10
RalphW Cooling Neophyte Join Date: Mar 2003 Location: Canada Posts: 32	Re: GPU Project Block The plan is for next week. I'll put in a more tapered chamfer on those holes you're referring to. I've put quite a few 4mm threads in 6mm and thicker copper. Maybe I'll practice on some 3mm first. My current graphic card has two mounting holes at 45 deg. to the core. I will drill and tap into the top after it's made. I can make up a stainless steel backing plate for this card and another one when (if) I upgrade the graphic card. The top section hopefully has enough overhang to mount cards with the four hole square pattern. I'm still looking for dimensions for GF7x00 cards.