Pro/Forums - View Single Post

RalphW · 05-26-2006, 10:16 AM

Thanks Jon

I measured my 6600 card as close as I could.

I'll be using a Haas VF-3 for the main components milling and a manual mini-mill for any future modifications.
I know someone who can post-process IGES drawings for the machine code.

I was going to use a 1/4" ballnose endmill for the top profile so if I understand correctly, that tool could be used to mill an angled hole with the part flat. I'm still not clear about this.

05-26-2006, 10:16 AM	#15
RalphW Cooling Neophyte Join Date: Mar 2003 Location: Canada Posts: 32	Re: GPU Project Block Thanks Jon I measured my 6600 card as close as I could. I'll be using a Haas VF-3 for the main components milling and a manual mini-mill for any future modifications. I know someone who can post-process IGES drawings for the machine code. I was going to use a 1/4" ballnose endmill for the top profile so if I understand correctly, that tool could be used to mill an angled hole with the part flat. I'm still not clear about this. Last edited by RalphW; 05-28-2006 at 06:52 PM.