Quote:
|
Originally Posted by bobo5195
TEC chiller setup is way to advanced get some anhydrous copper sulfate and be done with it (or of course silica gel). Drip plate won't really work as cards will get in the way and act as a very expensive drip plate.
Flourinert is as chemically unreactive as just about anything. The stuff your talking about is unstable enough that the blood stream can suck the oxygen out of it yet heavy enough a room temp. Plus free flourine in the lungs im guessing is not a good idea.
Radiator + fan won't work so well. You chuck air out the back of a case you lose heat as your losing 20 CFM air or whatever. Thats a case full of hot air very quick.
Best option in my option is use SLS to make the case and then put some FC77 or better (FC 40 or so) arpound to get rid of heat. In short all options lead to green backs.
|
With proper positioning, you really could put a TEC on a finned heatsink, but reverse the current when you want to melt the frost. You could put the heatsink down low so that the drips wouldn't go onto any card. But.... yes it's not easy or cheap. It just happens to be lower maintenance.
Rube goldberg for the win!