Pro/Forums - View Single Post

slicey · 06-04-2006, 05:25 PM

is this setup a BAD idea: i have a pump(MCP-350 modded) and heatercore( '77 Bonneville) in an external box at ground level. the CPU and GPU blocks are two feet above. would it be unwise then, to have my resevoir connected after the waterblocks and before the rad. like this: pump>waterblocks>res.>rad. also, the res. is physically located between the blocks and rad., elevation wise.
thanks for any help.

06-04-2006, 05:25 PM	#1
slicey Cooling Neophyte Join Date: Feb 2005 Location: payson,az Posts: 21	not sure if my W/C circuit config is OK? is this setup a BAD idea: i have a pump(MCP-350 modded) and heatercore( '77 Bonneville) in an external box at ground level. the CPU and GPU blocks are two feet above. would it be unwise then, to have my resevoir connected after the waterblocks and before the rad. like this: pump>waterblocks>res.>rad. also, the res. is physically located between the blocks and rad., elevation wise. thanks for any help.