Pro/Forums - View Single Post

blue68f100 · 06-07-2006, 01:57 PM

You have a v2 2000 which uses a single DIMM's chip. PC 100 will work, the spec is actually PC66 is all that is required.

The 2000v2 has a battery, think is a std CR2032, will need to check when you open it up.

Actually you are needing to upgrade the OS, The firmware covers the bios hardware, which has only been one release for the v1 2000.

06-07-2006, 01:57 PM	#151
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap OS 3.4.805, anyone? You have a v2 2000 which uses a single DIMM's chip. PC 100 will work, the spec is actually PC66 is all that is required. The 2000v2 has a battery, think is a std CR2032, will need to check when you open it up. Actually you are needing to upgrade the OS, The firmware covers the bios hardware, which has only been one release for the v1 2000. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820