Pro/Forums - View Single Post

ReD.SkY · 06-14-2006, 04:07 PM

The only resaon that there is higher power usage when more pressure is needed is because the motor has to turn faster.

as for the dual 1250's... its would add mroe head, but the head thats added will be cancelled out by the heat thats added.

A 50Z however dumps 8 watts of heat into the loop. so 2 x 50Z in series = 0.3c lower temps. All of cathar's test werent with a Storm or MP-05 and a GPU or 2 and a triple rad.

in the scenario with a high restriction block, SLI, and a triple rad, the 2 x 50Z would have a greater performance gain versus the one 50Z possibly 1c or more

06-14-2006, 04:07 PM	#10
ReD.SkY Cooling Neophyte Join Date: Mar 2006 Location: Sacramento, CA Posts: 29	Re: Dual eheim 1250? The only resaon that there is higher power usage when more pressure is needed is because the motor has to turn faster. as for the dual 1250's... its would add mroe head, but the head thats added will be cancelled out by the heat thats added. A 50Z however dumps 8 watts of heat into the loop. so 2 x 50Z in series = 0.3c lower temps. All of cathar's test werent with a Storm or MP-05 and a GPU or 2 and a triple rad. in the scenario with a high restriction block, SLI, and a triple rad, the 2 x 50Z would have a greater performance gain versus the one 50Z possibly 1c or more