Quote:
|
Originally Posted by Mike_CJO
Hi,
I have got a eheim 1046 pump and want to be able to use 8mm ID hose with it.
The standard fittings are for 13mm inlet hose and 11mm outlet hose.
I believe the inlet thread is 1/2" NPT and the outlet is 1/8" NPT. Please correct me if im wrong.
Does any one know where i can get hold of either an adapter to allow standard 1/4" fittings or some kind of barb or fittings that will screw into the 1/2" and 1/8" and allow a 8mm ID hose to attach?
I was hoping to get everything set up this weekend but thats not going to happen now 
Thanks for your help
Mike |
afaik european eheims are BSP not NPT........
outlet is G1/8" (1/8" BSPP)
http://www.eheim.de/eheim/pdf/deutsc...3146%20(D).pdf
and as the inlet is the same part as a 1250s outlet it is G3/8" (3/8"BSPP)
http://www.eheim.de/eheim/pdf/deutsc...3250%20(D).pdf
hmm - not sure i've seen anywhere that does 8mm
IDstuff.... is it a particular brand's standard?