Pro/Forums - View Single Post

GuyBFF · 08-16-2001, 12:39 AM

It only takes a quick change in BIOS to go from cas2 to cas3. As for the PSU I dought it, although it can't hurt. Although it appears you don't like the sparkle units, they are actually very good for athlons. 350w should also be more than enough unless your SCSI RAID drives really suck the juice, as they are rated well on all the voltages.

I also haven't had a problem using one two or three SDRAM modules with these FSB speeds. Currently one 256 and two 128s.

Good Luck!

08-16-2001, 12:39 AM	#16
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	It only takes a quick change in BIOS to go from cas2 to cas3. As for the PSU I dought it, although it can't hurt. Although it appears you don't like the sparkle units, they are actually very good for athlons. 350w should also be more than enough unless your SCSI RAID drives really suck the juice, as they are rated well on all the voltages. I also haven't had a problem using one two or three SDRAM modules with these FSB speeds. Currently one 256 and two 128s. Good Luck! __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...