Pro/Forums - View Single Post

Budwise · 08-13-2006, 12:13 AM

i would go with the MCP655.

I use the Microres from Swiftech and have had no issues.

For fans, Yateloons are all you need for the PA rads.

Tubing, i would get 7/16" Masterkleer. It is a little stiffer, alot cheaper, bends easily enough, and the 7/16" is better for 1/2" barbs.

I too started out with nonconductve fluid in my loop. I soon saw the nasty buildup caused by it as well. I now use Pentosin and distilled water and will never go back to premixed fluids.

08-13-2006, 12:13 AM	#2
Budwise Cooling Neophyte Join Date: Dec 2005 Location: Texas Posts: 29	Re: New WC Kit, need alittle advice i would go with the MCP655. I use the Microres from Swiftech and have had no issues. For fans, Yateloons are all you need for the PA rads. Tubing, i would get 7/16" Masterkleer. It is a little stiffer, alot cheaper, bends easily enough, and the 7/16" is better for 1/2" barbs. I too started out with nonconductve fluid in my loop. I soon saw the nasty buildup caused by it as well. I now use Pentosin and distilled water and will never go back to premixed fluids. __________________ AMD Opteron 170 Naked CCBWE 0546XPMW / DFI UT NF4 Ultra-D / X1900XT Flashed to XTX - Swiftech MCW55 / 2GB OCZ Platinum EB 3-3-2-7 1T / Sound Blaster X-Fi / Swiftech Apex Kit with Storm G4 / OCZ Powerstream SLI 600W PSU / Plextor 716SA SATA DVD Burner / 74GB SATA Raptor 10K rpm / 250GB SATA Hitachi Deskstar 7K250 / Thermaltake Armor / Samsung 940B DVI / Logitech MX1000