Pro/Forums - View Single Post

blue68f100 · 08-18-2006, 09:41 PM

Jontz is correct you should be in degrade mode. Depending on which version of the OS, Degrade may not be an option. I'm pretty sure I would go ahead and get a replacement drive. Once they have a major problem its time to replace them ALL.

I though there was another user that could not access there data till the drive was replaced. I had one uses report that in degrade mode the speed was about 10% of normal, real slooow.

08-18-2006, 09:41 PM	#5
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap 4100 orphaned drive question Jontz is correct you should be in degrade mode. Depending on which version of the OS, Degrade may not be an option. I'm pretty sure I would go ahead and get a replacement drive. Once they have a major problem its time to replace them ALL. I though there was another user that could not access there data till the drive was replaced. I had one uses report that in degrade mode the speed was about 10% of normal, real slooow. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820