Pro/Forums - View Single Post - DD Hiflow to NPT adapters for Laing D5 brass housing?

ricecrispi · 08-22-2006, 08:12 PM

http://www.lainginc.com/D5_Vario.htm
I remember the pump having two types of brass pump housings.

The housing is 1/2" thread ( .5" looks strange) is female so he needs a 1/2 to 1/4 adapter.

http://www.bsr-aerotek.com/store/pro...oducts_id=2246
http://www.homedepot.com/prel80/HDUS...2498+100081876

no sure if the o-rings on the barbs will hold up to methanol, epoxy should do the job.
Cheaper going for nickel 1/2" barbs instead

08-22-2006, 08:12 PM	#3
ricecrispi Cooling Savant Join Date: Jul 2005 Location: california Posts: 429	Re: DD Hiflow to NPT adapters for Laing D5 brass housing? http://www.lainginc.com/D5_Vario.htm I remember the pump having two types of brass pump housings. The housing is 1/2" thread ( .5" looks strange) is female so he needs a 1/2 to 1/4 adapter. http://www.bsr-aerotek.com/store/pro...oducts_id=2246 http://www.homedepot.com/prel80/HDUS...2498+100081876 no sure if the o-rings on the barbs will hold up to methanol, epoxy should do the job. Cheaper going for nickel 1/2" barbs instead Last edited by ricecrispi; 08-22-2006 at 08:30 PM.