Pro/Forums - View Single Post - Help Voltage Mod on KR7A-RAID

pHaestus · 02-04-2002, 04:02 PM

I am pretty sure that the KR7A uses the same IC as the KG7. Look around for Vmods on that board. I think to get the voltage back to default with the vmod installed you need a 100kohm pot on pin7. If you want more than 2.08 or so then you'll need to do the 2nd phase vmod on pin 11 (another 100kohm) and that should let you go as high as you dare. Lookthe KG7 vmod up before you do it though as I haven't ever done a Vmod on that mobo.

02-04-2002, 04:02 PM	#2
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	I am pretty sure that the KR7A uses the same IC as the KG7. Look around for Vmods on that board. I think to get the voltage back to default with the vmod installed you need a 100kohm pot on pin7. If you want more than 2.08 or so then you'll need to do the 2nd phase vmod on pin 11 (another 100kohm) and that should let you go as high as you dare. Lookthe KG7 vmod up before you do it though as I haven't ever done a Vmod on that mobo.