Pro/Forums - View Single Post - Snap Server 4500

sleonard · 09-08-2006, 08:38 AM

I've located the Snap Server Administrator Guide from the Adaptec website. According to this I should connect to it via HTTP at http://SNAPxxxxxx (xxxxxx = server number). However, When I boot my SnapServer I recieve the error "system hang" because there is no media to boot from, will this HTTP server run anyway? Also when the Broadcom UNDI-PXE-2.1 ROm is loading I recieve the error PXE-E54 - No boot filename recieved. - I'm assuming it's trying to boot off of the network here. Any advice is greatly appreciated. I also was considering writing the GuardianOSImage.gsu to the drive using Knoppix and DD as shown in the wiki but I'm guessing that is more for SNAPos.

Thanks.

09-08-2006, 08:38 AM	#3
sleonard Cooling Neophyte Join Date: Sep 2006 Location: Chicago, IL Posts: 5	Re: Snap Server 4500 - No OS installed. :doh: I've located the Snap Server Administrator Guide from the Adaptec website. According to this I should connect to it via HTTP at http://SNAPxxxxxx (xxxxxx = server number). However, When I boot my SnapServer I recieve the error "system hang" because there is no media to boot from, will this HTTP server run anyway? Also when the Broadcom UNDI-PXE-2.1 ROm is loading I recieve the error PXE-E54 - No boot filename recieved. - I'm assuming it's trying to boot off of the network here. Any advice is greatly appreciated. I also was considering writing the GuardianOSImage.gsu to the drive using Knoppix and DD as shown in the wiki but I'm guessing that is more for SNAPos. Thanks.