Pro/Forums - View Single Post

buck6919 · 02-04-2002, 09:51 PM

If you replace the hard drive cable with a cable that you can connect two drives too, you will be able to have two drive in the unit, eventhough they don't fit. This is how to do it....

Leave the existing hard drive as master and your second drive as slave. Power on unit go to web admin page, you will see that the second drive is formatting.

I have been unable to upgrade the single drive in my snap 1000. I have noticed that there is something odd about my drive in my snap on the top there is a plate that cover some kind of a ribbon cable that goes to the inside of the hard drive. I have been able to upgrade the drives on a snap 4100 at work. I did notice that these drive don't have that little cover covering a ribbon cable. If anyone can upgrade the single drive in a snap server 1000. Please let me know. I think that I have tried just about every combination of drives and jumper settings.

02-04-2002, 09:51 PM	#2
buck6919 Cooling Neophyte Join Date: Feb 2002 Posts: 9	Had some luck If you replace the hard drive cable with a cable that you can connect two drives too, you will be able to have two drive in the unit, eventhough they don't fit. This is how to do it.... Leave the existing hard drive as master and your second drive as slave. Power on unit go to web admin page, you will see that the second drive is formatting. I have been unable to upgrade the single drive in my snap 1000. I have noticed that there is something odd about my drive in my snap on the top there is a plate that cover some kind of a ribbon cable that goes to the inside of the hard drive. I have been able to upgrade the drives on a snap 4100 at work. I did notice that these drive don't have that little cover covering a ribbon cable. If anyone can upgrade the single drive in a snap server 1000. Please let me know. I think that I have tried just about every combination of drives and jumper settings.