Pro/Forums - View Single Post

Hallis · 10-04-2006, 04:19 PM

There should be the 3v round battery on the system board. disconnect your unit from power, remove this battery, and then press and hold the power button on the unit for 10 seconds, then release the power button, put the battery back in, and then plug it back into power and see if that makes a difference. That's a trick i always use.

shane

10-04-2006, 04:19 PM	#10
Hallis Cooling Savant Join Date: Oct 2001 Location: Dallas, Tx Posts: 469	Re: Snap server 2200 will not turn on There should be the 3v round battery on the system board. disconnect your unit from power, remove this battery, and then press and hold the power button on the unit for 10 seconds, then release the power button, put the battery back in, and then plug it back into power and see if that makes a difference. That's a trick i always use. shane __________________ Snap Servers: 1100 - 1x300gb Seagate Baracuda (SnapOS Version 3.4.807) 2200 - 2x80gb Maxtor (one dead) (SnapOS 4.0.860)