Re: snap 2200 - Mixing Disk RPM's
I had an 80-pin cable that was the exact same legnth as the 40 that came out of my 1100 so i swapped them just because. (the 80-pin cable came out of an old dead external HDD enclosure) It worked fine. I'm wondering what would happen if i try an ATA-133 in there. The only one I have is my boot drive on my desktop machine though. That one's not going anywhere.
Shane
__________________
Snap Servers:
1100 - 1x300gb Seagate Baracuda (SnapOS Version 3.4.807)
2200 - 2x80gb Maxtor (one dead) (SnapOS 4.0.860)
|