Pro/Forums - View Single Post

ICMike5 · 11-02-2006, 11:32 AM

JELo,
Check the underside of the board very closely. Specifically the solder joints to the power, on/off switch, battery and IDE power. You may have to wiggle the component on top and look at the corresponding solder joint underneath. If any move, examine with a magnifying glass and if any are cracked, resolder.
If the unit powers up but not the HD, check the short IDE power connector.

11-02-2006, 11:32 AM	#10
ICMike5 Cooling Neophyte Join Date: Oct 2006 Location: DuBois, PA Posts: 15	Re: snapserver 1100 many problems JELo, Check the underside of the board very closely. Specifically the solder joints to the power, on/off switch, battery and IDE power. You may have to wiggle the component on top and look at the corresponding solder joint underneath. If any move, examine with a magnifying glass and if any are cracked, resolder. If the unit powers up but not the HD, check the short IDE power connector.