Quote:
|
Originally Posted by gw1500se
The system light is flashing slowly but seems consistent, the link light is on steady, the net light is flashing rapidly and also seems consistent and the disk light is off.
|
Go to the Wiki section and look up doing a reset. Do a factory default reset (4 presses). Then after rebooting, use Assist and see if you see the unit.
For normal operation, the System light does flash slowly (like a heart beat). The link light should be on. And if it is seeing network activity, that light would be flickering.
Now if you did install a BLANK hard disk, give it some time to format the drive.
BTW, you have not said what model SNAP this is (there should be a sticker somewhere on the unit (bottom, back) with a model number. Is this a 1 drive, 2 drive, 4 drive, or even 12 drive unit? Describe it if you can't find a model number (or a picture). It will make things easier if we know what we are working with here.