Pro/Forums - View Single Post

blue68f100 · 11-10-2006, 05:01 PM

Glad to to see everything worked out for you. Were here to help.

Once you get the raid 5 built you will then need to learn how to setup users and security. The built-in security check will drive you nuts till you understand security.

Run "debug memory" from debug and see how much ram (PC100/133 DIMM) is installed. I recommend a min of 128meg, max is 256meg. Some units only came with 64meg. These units only work with low density, chips on both sides.

11-10-2006, 05:01 PM	#20
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap Server Boot Image Glad to to see everything worked out for you. Were here to help. Once you get the raid 5 built you will then need to learn how to setup users and security. The built-in security check will drive you nuts till you understand security. Run "debug memory" from debug and see how much ram (PC100/133 DIMM) is installed. I recommend a min of 128meg, max is 256meg. Some units only came with 64meg. These units only work with low density, chips on both sides. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820